2015年9月7日 · So this setup keeps my fusion reactor running at an injection rate of 2 during the night as well. This used to also supply brine for my 5x setup, so while I'm not processing any ore, it gathers surplus in bedrock drums. 9x brine Solar Evap towers 2x Lithium Solar Evap towers 28x Solar Neutron Activators 6x heavy water pumps

2024年1月5日 · For Lithium I build 5 max sized thermal towers to produce brine and 1 for lithium. These Towers are powered by induvidual resistive heaters at 1.5Krf/t. I used 64 solar nutron activators just to be safe. Everything on this side is buffered by 4x4x4 dynamic tanks (lithium as liquid) and observered by a simple computer craft setup.

2022年7月24日 · To put it simple - watercooled is better than air above injection of 98mb/t. This happens because from 98mb/t onwards the temperatures get to a point where the fusion reactor starts to become inefficient. While a fully aircooled „Tier 2“-Reactor is a good energy source with 200MFE/t it fails to compare to the water cooled equivalent.

2020年8月26日 · Thank you kindly! I had gone and essentially replicated (and slightly improved, added more vents for 240M RF/t max production) your boiler/turbine setup 4 times fed by the heat of a single reactor with the intent of pushing 1B RF/t in a creative world, just to see if I could, but I ran into fluid transfer and power transfer bottlenecks.

2019年4月17日 · My fusion reactor setup was only set to produce ~1M RF/t. This used two thermal evaporation plants at max size (18 blocks tall) with resistive heaters (no solar panels). Then I had 5 neutron activators, with a buffer of 6 ultimate gas tanks afterwards for the tritium. I also had 14 max upgraded electric pumps for the heavy water / deuterium.

2022年5月6日 · The setup I used in a old version, like 1.8.9 was -100 Brian towers -10 lithium towers -400 neuron activators -120 pumps -10 separator Edit: everything is build max size and fully upgraded

2022年4月27日 · The fusion reactor has 2 modes, You pipe in Deuterium and Tritium and let them combine in the reactor, you specify how much it takes with the ejection rate setting. Max at 99. Or you pipe in D-T fuel directly, this will make the reactor consume all D-T fuel present inside itself every tick. with a max of 1000, which is the way if you want lots ...

2023年4月12日 · The reactor can only get to 717 mB/t burn rate on water cooling before it reaches 1.2kK temperature and starts getting damaged. A max sized turbine of 17x18x17 with 14 layers of rotors (28 blades) can handle 11,040,000 mB/t of steam. To generate that much Steam, a Fission Reactor only needs to run at 552 mB/t burn rate (552 * 20,000 = 11,040,000).

2020年1月24日 · I now know that you can build a bigger setup (250 MRF/t) by using a boiler between the reactor and turbine, but I'll just present this as-is. Also, I'm not using a published modpack, just a collection of 49 mods that I personally like. This is Mekanism 1.12.2-9.8.3.390 with the default configs.

2015年8月13日 · Mekanism Fusion Reactor Setup Stats! News ... For the air cooled reactor 1/2 injection rate is deuterium ...