2020年1月29日 · in this video I am going to show you how to disassemble iron core transformers correctly without breaking

2013年10月9日 · It show you how to disassemble a small transformer & you must be very careful when you do it. Sorry for any annoying sound around, that was my bro also a ceremonial nea...more

Join David as he completes the repair of a small transformer used in a paper shredder power supply. The first part of the repair can be found in the Coil Cou...

2013年11月8日 · Ryan Jensen, AKA Instructables user jensenr30m, wanted to get at the magnet wire in his his transformer in order to make a relay. It turns out getting into those things can be pretty difficult; they’re not made to be opened. Ryan shows how to use a putty knife and hammer to force the core apart.

2018年2月14日 · Last year, we released a video demonstrating our no-loss top yoke dissassembly technique. (Click here for that.) This was in response to a common industry misconception that removing the top yoke increases the destruction factor in an electrical transformer core.

Start by taking one side and declaring that it is the top. You will work down from there. On the top, take your trusty pair of needlenose pliers and insert them into one of the corner screw holes and pry one corner up. Putting the whole it and kaboodle in a vice will hold the project steady.

Here’s a step-by-step tutorial on how to disassemble a Transformer. All in just over 1 minute!

2009年7月29日 · I have a transformer which has a damaged primary wire that I wish to disassemble and rebuild. I wish to do it without destroying the transformer completely. What I have found out so far is, most people break the core in the process, so I'm looking for a good safe way to dismantle the transformer that doesn't break or damage any of the parts. Thanks

We need to remove the case of the transformer and disassemble the laminations. The case of mine is removed by prying-up the tabs underneath the unit as seen at left. The case slides off and the end-bells then fall off. Next, as shown at right, use a …

2021年4月7日 · 1. the removed bolts and other parts shall be cleaned and properly kept. If there is any damage, repair or replacement shall be carried out. 2. when disassembling, first remove the small instrument and the shell, then dismantle the large …