SeaComAir offers filling valves, fill adapters and quick connectors in a variety of configurations and fittings. Filling valves and connections for Scuba Diving Cylinders and SCBA in accordance with national and international standards. Max. Pressure 230 bar / 3400 psi. Max. Pressure 330 bar / 4800 psi. Max. Pressure 330 bar / 4800 psi. Max.

A yoke valve consists of two primary components: the valve itself, which is attached to the diving cylinder, and the yoke fitting, which connects the regulator or filling whip to the valve. The valve is equipped with a threaded outlet port, which mates with the …

Adapt DIN valves for filling with a standard yoke filler. Fits all 200 and 300 bar DIN valves. Fill adapter has a rotating DIN handwheel and standard inlet and outlet O-rings (p/n VP15-V).

Always “crank” cylinder valves (open the valve just enough to allow gas to escape for a very short time) before attaching regulators in order to expel foreign matter from the outlet port of the valve.

The DGX DIN-to-Yoke Fill Adapter is a much better solution because it uses the same system for connecting to the cylinder valve as scuba regulators. This fill adapter has a hand wheel for easy attachment and removal, no wrench needed. Even better, because you can orient the yoke fitting a full 360°, the adapter adjusts to accommodate the ...

Most divers are aware that cylinder valves have either an INT (a.k.a. Yoke or A-Clamp) or a DIN outlet connection to their first stage. Unfortunately, there are different DIN outlet connections depending on the cylinder pressure and gas used, and this needs some explanation.

(Yoke) E 29-650: 1992 Cylinder Valve Outlet Connection 3268: 1984/C2 1986 Cylinder Valve Outlet Connection Nitrogen N 2 0.967 200/300 i 10 54 3 30 580 960 C RU3 Nitrogen Dioxide NO 2 3 0.962 ox, t, c 8 - 14 - 660 - P RU4 Nitrogen Trifluoride NF 3 2.46 100 t 8 - 14 - 670* - K - Nitrous Oxide N 2

Use this insert to convert any 200-BAR DIN style SCUBA cylinder valve for use with any yoke style first stage regulator up to the DOT rated maximum SCUBA cylinder service pressure of 3442 psi. The DGX insert has an 8-mm hex opening and includes two oxygen compatible 112 O-Rings.

The Sonar DIN to Yoke Fill Adaptor is a much better solution because it uses the same system for connecting to the cylinder valve as scuba regulators. Essential when travelling. Screws into DIN fitting cylinder outlets and allows filling from compressors fitted with A-clamp.