2013年5月17日 · 1. Screw two 2x4's flat against the siding, one on the left side of the door and one on the right side of the light. 2. Cut two more 2x4's with 45 degree angles on each end 3. …

2009年2月8日 · This awning didnt last long with snow and weather, as you can see from the picture's below ;^) I would like to replace it with a wood and shingle one but would really like to …

2022年10月20日 · I'm building an overhang over my front entry door and I'm not doing any posts on the ground. I'm going to put in some decorative corbels but where they fall there is no studs …

2017年7月11日 · I think basically if you are bearing the load around the opening to the framing below, you will be fine. For 2x6 walls, another method I have used is use 2x10s for the …

2011年11月4日 · I have been nominated to build a decorative, concave, metal-covered, wood-framed awning over front door for curb appeal. I have spent 2 weeks on-line looking for …

2010年11月23日 · Let maintenance slip just a little with wood and you've got a mess. Wood shrinks, warps and does all kinds of crazy things from temperatures and sunlight. The only …

2019年7月2日 · That door set looks nice even with a slight warpage of some of the pieces. In order to prevent leakage through a deck or bulkhead door made up of individual planks, you …

2019年2月22日 · Thanks for your responses. Sorry for the delay. I have attached pictures of the building and awning. #1: where are you located: South MS #2: how big is the awning: …

2012年7月13日 · The area behind the fancy W brace and the house should be closed off, impossible to shingle later. And yes the roof will need to be opened up so the beams can rest …

2005年12月1日 · Hi, I'm trying to build my own folding (accordion) door. It's going to be used to partition the kitchen (smells) from the rest of the house. The opening is 91" height X 32" width. …