2008年2月3日 · Water Softeners and Air Filtration Systems - Kinetico Brine Tank Level - I have a Kinetico Model 30 with a large round brine tank. It was not using salt because both the brine cell and under the bottom grid were completely caked with solidified salt. I completely cleaned out the tank, cleaned the brine tank valve and

2011年8月28日 · Water Softeners and Air Filtration Systems - Kinetico Model 60, Disc #2 Does Not Access Brine Tank - I have a Kinetico Model 60, double tank, disc #2 which was installed 23 Jan 2003. A couple of months ago I noticed it was not using any potassium chloride and did a manual regeneration and found no water being sprayed

2008年8月29日 · I think I need two things to fix this unit - new resin, and a fix for the brine tank float valve assembly. Pretty sure the resin needs replaced after 20 years. And I don't believe the brine tank is filling correctly. I have taken it apart and cleaned the float valve but when I manually set it to brine/rinse the water level stays close to the same.

2012年3月13日 · Water Softeners and Air Filtration Systems - Kinetico Model 60 Rebuild - We've recently moved into a new home. The model 60, which is about 12 years old, seemed to be working just fine until a few days ago. It went into regenerate mode and never came out and the brine tank is higher than normal. I should note that I

2006年3月2日 · Water Softeners and Air Filtration Systems - Kinetico 2 tank- Brine Tank not filling - Brine tank does not fill with water during the regeneration stage. There is only a few inches of water in the tank... 1. How high should the water level rise during regeneration? 2. Where should the 'float' itself be on the stick...

2009年6月13日 · Water Softeners and Air Filtration Systems - Kinetico 2060 Brine Tank Water Level - I converted my system from Potassium to Salt and with the salt plate installed the water does not even cover the top of the plate. This just does not seem like there is enough water in the tank. Should I add additional water or adjust

2008年9月3日 · Water Softeners and Air Filtration Systems - kinetico k?? not drawing brine - My Kinetico K whatever will not draw brine . All other functions seem to be fine when cycled manualy The system is Aprox. 4' tall with 2 tanks and brine tank …

2024年6月26日 · Water Softeners and Air Filtration Systems - Kinetico Premiere Softener not regenerating - I have a Kinetico softener that gave up softening. I cleaned the brine tank, cleaned the float brine intake and water outlet + set the float height, removed/disassembled the head (except where the gears are) and cleaned out any

2008年8月17日 · Sounds like you know how to manually recharge your system. Place system in brine draw cycle and disconnect the brine line from the valve head. Lick your finger and place it on the brine elbow. It should pull your finger into the elbow. If so, replace the brine line and pull brine assemble from salt tank. See if float stem moves up and down freely.

2014年4月11日 · Water Softeners and Air Filtration Systems - Kinetico Model 60 Help. - I have a 14 year old Kinetico Model 60 that is getting stuck during regeneration. It pulls brine solution from the Brine tank and proceeds with cycling with water continuously runs down the drain, staying in this phase until. I am able to stop the