Multiple iLO devices Manually deploying a large number of iLO-enabled servers is a time-consuming task. HP HP has developed samples of XML script files that can be used along with the Lights-Out
HP Recommended SMART Array Rebuilding/Restoring Techniques scope of this paper The purpose of this document is to provide instructions for replacing hard drives in hp systems, particularly during circumstances where multiple drive replacement is desirable. Additionally, this document focuses on Microsoft’s utility DISKPART to expand the drive.
• iLO Advanced Pack features, such as SSH access, group actions capability, and LDAP NOTE A complete description of the iLO MP is provided in the HP Integrity and HP 9000 Integrated Lights-Out Management Processor Operations Guide. Configuring the iLO MP LAN Port IP Address
Enter the iLO MP command mode (enter CM at the MP: prompt). Step 16. At the MP:CM> prompt, enter LS to confirm the new LAN settings. Step 17. Enter SA to enable or disable the Web console and telnet access after the iLO MP has been reset. NOTE HP recommends disabling access methods that you do not intend to use. For example
If you configure HP Agentless Management through the iLO 4 GUI, HP SIM receives alerts from the iLO Management Engine. Because of the advantages that HP Agentless Management offers, this is the preferred configuration. It eliminates any potential for duplicate information from the managed server .
HP Integrity and HP 9000 Integrated Lights-Out (iLO) Management Processor Operations Guide
ILO based Server For an iLO based servers, the server must have loaded onto it the iLO Management Interface Driver. The Smart Start operating system install process normally installs this driver. During execution, HPONCFG will warn if it cannot find the driver. If the driver is not installed, it must be downloaded from the HP
hp industry standard servers how-to introduction 2 ervi w 2 ardw e 2 ProLiant servers 2 storage controllers 2 network interface controllers (NICs) 3 hardware configuration 3 ROM-based setup utility (RBSU) 3 disk partitioning 3 understanding linux partition names and device names 4 notes on /boot 5 distributions 5 installation process 5
Description The "hpasmlited" application will automatically load on HP ProLiant servers with the iLO 2 management controller and and the "hp-OpenIPMI" package NOT installed. The hpasmlited application is designed to work with the standard IPMI device drivers that ship with the Linux distributions. The IPMI device drivers that ship with the Linux
If the HP Integrated Lights-Out (iLO) method of installation is used, the firmware revision must be capable of supporting Virtual CD in the HP iLO interface. The HP iLO ROM revision must be 1.4 or greater to support Virtual CD: this ROM version …