2018年8月18日 · 20MHz is the most common Wi-Fi bandwidth as most users still opt to use 2.4GHz radios. 40Mhz-----In an environment with less congestion where a higher data throughput is required, using the 40MHz channel can be a good idea as it still offers 12 non-overlapping channels on 5GHz . 80Mhz-----80MHz is available on many 802.11ac routers.

2011年8月29日 · LAN - 3750G (A) - (4 x 100Mb links aggregated into 1 port-channel) 3750 (B) - Internet I am doing source mac address base loadbalancing on 3750G (L2) at A and the Service Provider is running destination mac address loadbalancing on the 3750 (L2) at B.

2024年3月22日 · "Wi-Fi Mode, Security Mode, Channel Selection, Channel Mode, and Channel Bandwidth are being managed automatically to help optimize your home Wi-Fi network and improve Wi-Fi coverage." Don't see how this is the case when EVERY network in my neighborhood sits on the exact same channel. xFinity needs to stop treating it's customers like …

2021年12月15日 · "Wi-Fi Mode, Security Mode, Channel Selection, Channel Mode, and Channel Bandwidth are being managed automatically to help optimize your home Wi-Fi network and improve Wi-Fi coverage." The first message is what I get on the Xfinity website to change my Wifi mode and the second is via the router settings.

2020年12月28日 · Hi expert 1) I would like to know, why DSSS consist 22MHz wide? Why not 30, 50MHz and so on? 2) Channel 1 consist 2.401–2.423 GHz (2.412 +- 11MHz).

2012年7月16日 · What you call a "single frequency" is not a frequency at all; it is simply the frequency width, or bandwidth if you will, of a channel. Therefore a 4 kHz channel doesn't mean that it only passes signals of 4 kHz frequency; it means that the difference between the lowest permissible frequency and the highest permissible frequency within that ...

2017年8月23日 · What Etherchannel might do, if multiple flows are distributed across multiple links, your multi flow overall bandwidth will be greater than one link's capacity. For example, if you have two flows, one might use link 1 and one might use link 2, then your overall throughput is twice what one single link might offer.

2023年11月11日 · @cm33333 I apologize for the confusion and that the options are grayed out. From my understanding, our Xfi system auto-selects the best channel and manages the channels automatically for every device connected to your network, so there wouldn't be an option to adjust the channels outside of purchasing your own modem that has the capability.

2024年11月5日 · One last remark regarding the AD9364. Please be aware that the maximum Tx power level of the AD9364 at the upper frequency range 5.5 GHz … is limited depending on the RF channel bandwidth. Please check and compare Table 9 and Table 10 on page 9 …

2020年11月19日 · I.e. any one flow cannot obtain more than a single link's bandwidth. Since load balancing is per flow, during short term time periods, or the nature of your traffic (e.g. high volume between just one pair of hosts) you might see some links, even over a long time period, utilization's higher, even much higher, than other links.