2024年8月15日 · Below are the steps to take to produce views showing color plans in various formats. With some patience and a little fun, you can create cool views to enhance your design intent conversations with your client utilizing Color Fill …

2024年4月26日 · After drawing the existing floor plan, you should create a DEMO View. 11. Change phasing in original view to below Phase Filter and Phase. 12. To DEMO an item in the drawing (There are alternative ways to demolish an item. This is my preferred way) 13.

Apply color schemes to floor plan views and section views based on a specific value or range of values. You can apply a different color scheme to each view. To use color schemes, you must have rooms or areas defined in the project. To use color schemes for MEP elements, you must also have spaces, zones, pipes, or ducts defined in the project.

2015年1月28日 · Basically, you need 3 views set up. First, a "work" existing plan for placing existing building elements, both those to remain and those to be demolished. Place all existing items in this view. Then select the ones being demolished and use the properties palette to change the Phase Demolished to "New Construction."

In the Project Browser, right-click the floor plan view or section view to apply a color scheme to, and select Properties. On the Properties palette, click in the Color Scheme cell. In the Edit Color Scheme dialog, under Schemes, select a category and color scheme. Click OK.

Create a Sheet. Open project GSG_13_sheets.rvt. Click View tab Sheet Composition panel (Sheet). In the New Sheet dialog, under Select titleblocks, select A1 Metric, and click OK. Click the title block to select the sheet, then click the sheet number, enter A1, and press Enter.

2019年5月17日 · Goal: To create a (traditional) demolition plan that shows the walls, doors, windows, etc. to be demolished as highlighted and hatched over the existing conditions view. This is traditionally a bold, dashed red line and a red diagonal hatch so that what is scheduled to be demolished is very clear.

2014年11月19日 · Demo plans have a phase filter of "Show Previous + Demo" (or similar) and the Phase is set to New Construction. This means the only rooms you will be able to see or tag are those in the new construction phase. To show existing rooms in a demo plan some people overlay 2 plans on a sheet, one with demo items and one with the tagged rooms.

2019年12月22日 · On a few of my sheets in my CD set I would like to use an annotation to highlight in a color (or pattern) specific model elements in a 3D view to help the reader better understand my 3D drawings (see attached image). I will then add notes to explain the color/pattern highlight area.

2006年7月19日 · As I laid out the new construction, I used the demolish tool to blow out what was being torn down. For my views, I set one up as Existing/Demo Plan, with the settings in the phase filter to Show Previous + Demo. I set up the second view to Show Previous + New. Those sheets are what is going to be part of the construction document pack.