2023年9月17日 · Powder coating provides a high-quality finish that is both long-term and visually appealing, protecting magnesium against corrosion and oxidation while adding an attractive aesthetic to its exterior surface. Furthermore, this process can be done on various metal types including magnesium.

2024年2月9日 · In this blog post, we will explore the key techniques for powder coating magnesium, including pre-treatment methods, selecting the right powder coating material, application methods, and curing and finishing techniques.

2011年3月1日 · I have some quad engine cases to powder coat. They are magnesium and I know that is a pretty soft metal. So should I be worried about them distorting during the curing cycle? Also I like to throw the part in after cleaning to bake off any oils that may cause out gassing. I usually go like 450° for say 10 minutes.

Powder coating is a dry finishing process where a finely ground powder, typically a polymer resin, is electrostatically sprayed onto the magnesium surface. The coated component is then cured to create a durable finish.

Magnesium powder coating and surface treatments. We have over a decade of experience in processing magnesium, used extensively in the automotive, electric vehicle, aerospace and bio-medical industries.

2018年3月11日 · Within the organic coating category, powder resins, high-temperature coatings and water-based coatings are options provided alkali-resistant binders and pigments are used. Magnesium oxidation produces highly alkaline byproducts, acting as a stripper for many organic primers. Powder resins coatings are used in a variety of applications and are ...

2002年4月18日 · The authors found that die-cast magnesium samples treated with the Anomag process, followed by powder coating had good paint adhesion properties and excellent corrosion protection. Further development in the areas of cost reduction, choice of chemicals used in the process and layer thickness optimization was proposed.

Magnesium can be coated by electrochemical plating in which the part is covered with a metal that possess the desired characteristics of the end material. The metal is present as a salt in solution and is reduced into its metallic form onto the part’s surface.

2004年8月1日 · Of all the stripping methods available for powder coated products, the ones that will work best for magnesium are chemical stripping and mechanical abrasion (grit blasting or sanding). Whatever you do, do not use a burn-off oven!!!

2024年11月6日 · Magnesium alloys can be anodized, conversion coated, painted, electroplated, or mechanically finished. Magnesium can be cast by sand, die, permanent mold, and precision investment methods. It is usually extruded or rolled into sheets, plates, and strips.