2024年5月16日 · Get new U-joints with grease fittings. According to training.dana.com the proper way to grease a U-joint is to add grease until it starts to come out of the caps. If it's not coming …

2012年4月19日 · It should have a fitting for you to grease it on the drive shaft pretty close to the U-joint if I'm not mistaken. If not, you could always tap a fitting in there. 2008 Ext. Cab …

2010年8月27日 · I found the 10 grease fittings listed for the front suspension and steering but could not find the drive shaft fitting, nor is there a support near mid-shaft. I'll keep looking but …

2023年12月11日 · Everything I have come across online points to lube points/grease fittings only on the tie rod ends. Some sources indicate on trucks with a sliding drive shaft joint there also …

What grease fitting on under the starter? There are 11 in total. One on each upper and lower ball joint. If you have the 4wd, then you have one on each inner and outer tie rod, one on the …

2008年6月4日 · If you have a drive shaft with a zerk on the u-joint, be sure to grease it too. Close up view of the 90 degree, 6mm, zerk that I replaced on the end of the idler arm, where it …

2016年8月1日 · Step 1: Check for a zerk fitting. If there is a zerk fitting, then greasing a slip joint is very easy. Simply use your grease gun to inject the grease into the joint. The use of a grease …

Most new vehicles' U-joints are greased from the factory and are not serviceable, but aftermarket U-joints often feature grease fittings for service to help lubricate needle bearings and expel …

Shop for the best Drive Shaft Slip Yoke for your 2004 Chevrolet Silverado 1500, and you can place your order online and pick up for free at your local O'Reilly Auto Parts.

2012年11月27日 · I thought I would post here in case anyone else is like me and is wondering if they're finding all the zerks. Complete with helpful pictures! This is an older thread, you may …