Our solutions engineers are standing by to assist you in planning and designing an integrated Crestron solution. We stand behind and validate our designs, so you know your system will …

For European or U.K. installations, use a #1 Phillips screwdriver. For U.S. installations, use the four 6‑32 x 3/4 in. screws. For European installations, use the four M3 x 16 mm screws. For …

For European or U.K. installations, use a #1 Phillips screwdriver. For U.S. installations, use the four 6‑32 x 3/4 in. screws. For European installations, use the four M3 x 16 mm screws. For …

Use the following procedures to install the CP4 and CP4N control systems. The control system may be mounted into a rack or placed onto a flat surface. The control system occupies 1U of …

For European or U.K.-style installations, use a #1 Phillips screwdriver or its equivalent. • For U.S.-style installations, use the four 6-32 x 3/4 in. screws. • For European-style installations, use …

The Crestron® DIN-PWS50 is a 50 W Cresnet power supply module designed to snap onto a standard DIN rail for installation in a wall mount enclosure. DIN rail mounting enables modular …

The only tools and supplies required and not supplied are a level, tape, flathead screwdriver, #2 Phillips screwdriver, 1/4” hex driver, and a glass cleaning product that does not leave

To mount the device into a 1-gang electrical box: Using a Phillips screwdriver, remove the two screws from the top and bottom panels nearer to the front panel of the device. Align the …

1. Insert a small flat head screwdriver into the hole shown in the following illustration and gently separate the back panel from the touch screen. 2. Use the four included 06-32 x 1 1/2” screws …

The tools required for installation are a #2 Phillips tip screwdriver, a 1/4-in nut driver or wrench, and a grounding strap. Follow the procedure after this paragraph.