2017年6月14日 · I am currently converting a PTO 5 King Kutter Brush Hog (agri gear box) to hydraulic to run off my T200 Bobcat skid steer. The problem I am experiencing is attempting to identify the torque necessary to turn the brush hog at a certain RPM.

2007年1月14日 · SO working through thoughts of converting a 5ft old Howse brush hog for this purpose. I would run it somewhat offset from the FEL not unlike the Lane Shark setup. My tractor is an M7040. Pump flow is 11gpm pressure 2770psi.

I converted my 3pt PTO tractor Brush Hog to run on my Bob Cat's front Hydraulics

2013年2月8日 · Why not replace the gearbox with a hydraulic motor instead of driving the gearbox with one? It goes on a ways before the MFG of the unit being discussed chimes in with details. He needs to add a spindle between the motor and the blade carrier. It's just much simpler and cheaper for him to connect the motor to the existing gearbox.

2016年1月30日 · I am going to convert a 5' brush hog to hydraulic drive and mount it on a skid steer. I have read a lot about this and have a question. I read that I should enforce the deck under the drive gear box. Is there enough shaft length to say add 3/8" of steel? I never had one apart so don't know if there is enough shaft length.

Here is part 2/2 of the Brush (bush) hog (cutter) PTO to hydraulic conversion. For the promised more in depth look at the hydraulic system on it, and a bette...

2015年2月3日 · When I bought my Mustang MTL25 skid steer I decided I would convert the 3 point PTO mower to attach to the skid steer and be run by a hydraulic motor powered by the skid steer auxiliary...

2006年5月17日 · I have been looking at the RHINO LJ60 rotary brush cutter. I was wondering what a feller would have to do to convert this item to run off of skidsteer hydraulics? I am sure this is possible, but is it worth it? I have seen some of the adapter plates with hydraulic motors to use 3 point hitch implements, but they seem a little expensive.

2010年3月30日 · I would like to get a 4ft finish mower or a brush hog, tear off the PTO shaft, and replace it with a hydraulic pump. I know ingersoll sells these, but the brush cutter they sell is $3750!

2010年6月18日 · If you find a motor that's 95% efficient, you've got 23.75 hp turning the mower. It's slightly underpowered for a 5 foot brush hog if you go by the 5hp per foot of diameter of the mower, but it should be okay. If you're replacing a tractor pto shaft with a hydraulic motor, you need a motor that turns at 540 rpm given 17.7 gpm.