Formation of copper nanoparticles on zinc oxide (ZnO) powder is studied using a common chemical vapor deposition precursor, copper hexafluoroacetylacetonate vinyl trimethyl silane, Cu(hfac)(VTMS).

In this study sol-gel technique was used to prepare Al-, V- and In-doped ZnO. The morphology and microstructure of samples synthesized was characterized by means of different techniques such as X-ray ...

For shear strength, the best performance came from the sample containing 3.75 phr CSR and 5 phr ZnO, which showed a 27 % improvement over pure epoxy. TGA analysis revealed that the sample with 5 phr ...

The results showed that the ZnO nanoparticles synthesized by the Pechinhi method, with calcination temperatures of 600 and 800ºC, presented a predominant morphology of nanorods and nanospheres, ...

SEM characterization of ZnO shows the morphology of needle-shaped nanoparticles. XRD spectar in this research by chemical method indicates the particle size of 17.76 nm. The ZnO molecule plays an ...

Silver nanoparticles and zinc oxide have been incorporated in polymers individually by researchers. The objective of this study is to compare the effect of incorporating the mixture of silver and zinc ...

The ZnO nanoparticles were prepared at 60 degrees Celsius using zinc chloride and sodium hydroxide. The as-prepared ZnO nanoparticles were analyzed using scanning electron microscopy (SEM) and X-ray ...

SEM images of the ZnO nanoparticles synthesized using Cassava starch show the presence of pseudo-spherical nanoparticles and nanosheets, while just pseudo-spherical nanoparticles were observed when ...

Abstract. In the present study, mehendi extract (Lawsonia inermis) was used for phytosynthesis of ZnO nanoparticles using 0.1 M Zn(NO 3) 2 as precursor under alkaline condition using NaOH with ...