The peak value of the equivalent stress on the outer surface reaches 579 MPa, that of the inner surface is 394 MPa, and the peak value of the outer surface is close to the yield strength of the pipe.

Following FEA deployment, the deformed meshes for the stent and vessel were used as inputs for CFD. FEA predictions were investigated as to whether high tensile hoop stress in the interstrut region ...

In advanced engineering circles, the finite element method — or, more commonly, finite element analysis — is a real ... the part was at relatively low stress instead of at the maximum stress.

A possible cause of such degradation is an inhomogeneous hoop stress distribution, or hoop stress modification (both increase and decrease), induced by the screening current. In this work, we ...

What if you could run a full-assembly stress analysis without the painstaking preparation? Canadian startup, SIMSOLID says, no problem. Used correctly, finite element analysis (FEA) software is a ...

Act fast, because tryouts are limited to the first 75 hoop dreamers to pay. So if you think you have what it takes, this is your chance. Pro hoops is calling your name.

principal stresses and von Mises stress. I normally run through them in the following order when post-processing a finite element analysis model. Von Mises stress. This is checked as an overall ...