The Arduino Nano Connector Carrier is a compact add-on board designed for the Arduino Nano boards to allow easy connection to ...

This is the Sensirion SHT4X library for Arduino allowing you to communicate with a sensor of the SHT4X family over I²C. Click here to learn more about the Sensirion SHT4X sensor family.

Arduino has just launched a “Plug and Make” kit designed for beginners with an Arduino UNO R4 WiFi board, several “Modulino” modules, a “Modulino” base to neatly attach the UNO R4 and modules, and ...

For instance, it's based on the same microcontroller, uses almost identical pinout configuration ... display module. The I2C/TWI pins on the Micro are on D2 and D3. For Arduino beginners, these ...

Then, chances are you already know what an Arduino is ... you can dedicate for I2C/TWI communication. A few other distinctions you'll notice between the two boards' pinouts are that the Nano ...

The Arduino UNO R4 Minima comes equipped with the ... Moreover, the inclusion of a Qwiic I2C connector lets users easily connect to the extensive Qwiic ecosystem, providing further creative ...

The TSL25911 sensor module has a total of 5 pins. Two power pins, one interrupt pin, and two I2C pins. The pinout of the module is as follows: VCC - Provides power for the module, Connect to the 5V ...

4.1.2 arduino_pinout文件夹 需要在applications文件夹下创建arduino_pinout文件夹 ... 一般使用 GET_PIN 宏来获取。注意：D0、D1以及I2C、SPI IO需要将此参数略过。 后两个参数是复用功能IO才需要填写的，普通引脚只需要略过即可。 D0、A0等引脚的数字宏，该宏一定要按照先 ...

Click here to learn more about the SGP40 sensor and the SVM40 Evaluation Kit Board. Connect the SVM40 Sensor to your Arduino board's standard I2C bus. Check the pinout of your Arduino board to find ...