Applying stucco is almost always a two-step process. You typically apply a base or scratch coat that is about 3/8 -inch thick. The stucco mixture is a combination of clean sand, masonry cement and ...

ANSWER: Although applying stucco over concrete block is simpler ... The first coat is the scratch, or base, coat. This is a mixture of Portland cement, lime, masonry cement, plastic cement and ...

When cured, apply the textured brown coat. The 1/8-inch color coat goes on last. For more on siding, consider: Stucco 101 Applying Stucco (VIDEO) Bob Vila's Guide to Exterior Siding Related ...

Applying stucco is almost always a two-step process. You typically apply a base or scratch coat that is about 3/8 inch thick. The stucco mixture is a combination of clean sand, masonry cement and ...

Applying stucco is almost always a two-step process. You typically apply a base or scratch coat that is approximately 3/8-inch thick. The stucco mixture is a combination of clean sand, masonry ...

And if you're wondering whether you can fix the problematic spots by applying new stucco to the old coat, we have some good ...

Applying stucco is almost always a two-step process. You typically apply a base or scratch coat that is approximately 3/8-inch thick. The stucco mixture is a combination of clean sand, masonry ...

Then add a base bonding coat that gives the stucco something to adhere to on the home's exterior. After the bonding coat ...

For exterior stucco, the traditional application includes up to 4 layers — the dash (base) coat, scratch coat, brown coat, and finish coat — although newer methods require only 1 or 2 coats.