Even on perfectly square corners, 45-degree angles won't always yield ... Use a damp (not wet) cloth to remove excess glue ...

A finished coped joint appears to be a perfect miter, in which the ends of two mating pieces of molding are cut at 45 degrees. In coping, however, only one of the pieces needs to be cut.

This joint hides the end grains on the two pieces. A 90-degree miter angle is produced by sawing two pieces at 45 degrees each. An inexpensive miter box and saw should be adequate. If some corners ...

each miter is cut at 45 degrees. There are three types of open miters. A miter can be open at the top of the joint, the bottom of the joint, or across its face. Before assuming the problem is with ...

Just as a 45-degree angle is always used when mitering corners for a square or rectangle, there are specific angles to use when mitering other shapes. The angles used for mitering three decorative ...

Jigs make life so much easier, and when you build one yourself it's even better. Make perfect 45 degree mitered corners every time with this do-it-yourself jig made of plywood. You can build this ...

If you are making a rectangular frame, each pair of sides needs to be the same length in order for the corners to be 90 degrees. STEP 3: Miter joints are not strong enough to be held together with ...