PCB Connector with PTFE tilting and lifting off board during solder reflow Reflow Stable PCB Connector during reflow. The connector stays firmly on the board. The Need for Kovar/Glass. The solder ...

When soldering a connector to a cable, the solder can wick up the cable braid during assembly, creating a rigid section behind the connector. When flexed, this area will crack and break. The company’s ...

The micro RF connector delivers excellent high-frequency performance, Hirose said, and offers low voltage standing wave ratios (VSWR) of 1.3 maximum (0 to 3 GHz), 1.5 maximum (3 to 6 GHz) and 1.6 ...

PCBs and electronic components are becoming smaller and smaller, making it difficult to maneuver around the PCB, especially when trying to solder. If you’re using a soldering-iron tip that’s too large ...

SAMTEC RF edge launch connectors are designed with a narrow body design that is 33% smaller than traditional edge launch connectors. Devices are commonly used in a lab setting for high-frequency test ...

PEI-Genesis has expanded its distribution agreement with Cinch Connectivity Solutions and is now authorized for six of their RF connector brands, including Midwest Microwave, AIM Cambridge, Trompeter ...

Solder seal is a generic name for these connectors, and you’ll find there are many brands available. I have tried Solder seal connectors from both Kuject and Sopoby , which performed equally well.

I use a mix of a Hakko FR-300 and a “scoop tip” to remove things. The FR-300 is self explanatory, its just a vacuum with a soldering iron on it.

World RF Connector Market 2023How did the RF coax connector market perform in 2021? How will it perform in 2022, in 2027? What markets and geographical regions present the greatest potential for ...

The thickness of the IMC layer on the RF connector side obtained by LJSBB was thicker than which obtained by manual soldering, while the microstrip side was the opposite. The average SWR of LJSBB ...