The trick is to fasten the repair piece; there is rarely a wall stud where the hole was created. I like to take a piece of wood no thicker than three-quarters inch to use for the next step.

Here's what to do if you have a big hole in your drywall that needs to be patched. Skip to main content. Open Main Menu Navigation. Open Search Clear icon. 66 ...

A good old-fashioned DIY drywall repair might save you a trip to the hardware store. ... If the wood doesn’t fit tightly to the back of the drywall, correct the problem.

Now you can screw your drywall patch onto the wood, ... put a lot of compound on the wall first, then go back with your knife and scrape off the excess to leave a smooth-ish patch over the drywall.

The wood provides backing. Prepare the drywall patch. Cut the piece of drywall with the razor knife to size and place it in the opening. Using a screwdriver (a power screwdriver is recommended ...

Regular patch with backing. ... You may have to back it with a piece of wood. Then attach the drywall and use a good-quality drywall tape to cover the seams. Prime, ...

Installing backing: With the patch and hole ready to go, the next step is to provide something for the patch to be mounted to. Here, small pieces of wood can be glued around the opening of the ...

Drywall, although efficient for most average homes, ... Well, it’s not that hard to repair.Any hardware store or home center will carry […] Skip to content. All Sections. Subscribe Now. 87°F.

Fasten the drywall patch to the 1 x 4 and 2 x 2 supports with 1-1/4-inch drywall screws. Now patch up the edges: Use a 4-inch drywall knife to apply joint compound around the perimeter.

Simply apply mud to the patch’s seam using a 4-inch drywall knife. Make sure the layer of mud exceeds the length of your seams by an inch on each side. Advertising ...

This paper will overlap with the existing wall, eliminating the need for drywall tape. Screws and wood backing are also not ...