Yet many of these strategies are only applicable to some polymer-particle combinations or are difficult to implement on a ...

Therefore, in using TSP as a directly compressible polymer in a matrix-sustained release tablet, the particle size used should be taken into consideration to avoid poor flow from the hopper and ...

Some of the challenges in the polymer–particle fabrication process include ensuring uniform particle dispersion and accurately controlling the volume fraction or weight percentages of the ...

Researchers have developed a groundbreaking 'Hybrid Supraparticle Synthesis Technology' that attaches inorganic nanoparticles ...

Particle size was accurately measured at 122 ... the molecular weight of the PEI polymer, (ii) the mass ratios of BSA:PEI,(iii) the addition of a NaCl salt and (iv) the total volume of the container.

Figure 4 shows the effect on the mean count rate and z-average diameter of a polymer particle dispersion as the temperature was increased. The measurements were made at 1°C intervals with an ...

Split ends: This image of a dendritic polymer particle was taken via confocal microscopy and coloured for vertical directions. A single “hairy” particle can reach several hundred microns in overall ...

To try to address this problem, previous researchers attached a polymer, such as polyethylene glycol, onto one of the particle's fatty components, but this didn't stabilize the resulting lipid ...

The outcomes show that offshore wind parks constitute a new anthropogenic burden for the marine environment: according to the study, the polymer particle emissions from rotor blades, produced by ...