Using a simple crossover network cable, you can connect a desktop computer to your laptop to scan and clean its hard drive with virtually any anti-virus or anti-malware application. Power off both ...

Connect the hard drives with SATA. Once the drive is mounted, ... When you’re done connecting the SATA cable, you’ll have to connect the drive to your power supply unit (PSU).

Check the physical connection: reconnect the hard drive, reconnect to a different USB port, or reconnect using a different cable. Update software : Launchpad > System Settings > General > Software ...

Connect the other end of the FireWire cable to the FireWire port closest to the power supply, or the one marked "In," on your first drive. For the best performance, connect your fastest drives first.

To work properly, a hard drive needs power and a connection via a ribbon cable to the PC. ... Secure both ends of the ribbon cable connector and make sure the connector is covering all pins.

Once you have the drive out, you’ll need a dock to connect a bare drive to your computer via USB. You can buy a dock online for around $25. The dock will power the drive and you’ll know pretty ...

Seagate offers six cable kits for the portable drive system. Of those, only the USB 2.0 GoFlex Cable ($20) can be removed from the connector module; the rest are fixed in place.

Look carefully at the floppy drive and see if there is anything on the PCB that says "1" by a pin or something. Some floppy drive have their pin 1 on the far side from the power connector.

If it does, you can reconnect the cables from both the hard drive and the MOBO or replace the cable with a new one. Read : Windows does not recognize second Hard Drive . 4] Perform PC hard reset ...

This week I got an email from a reader who asks, “I have a stand-alone hard drive that cannot be accessed anymore. I've tried different laptops and different cables, but to no avail. The light ...