Manufacturers of custom & standard DC Motors, in quantities as low as 1 to 100. Wound Field DC Motors. Permanent Magnet DC Motors. Electrical designs available for special speed and torque requirements. Two pole permanent magnet design provides excellent commutation even under the most adverse and severe conditions. Allows minimum maintenance and downtime in brush replacement. Permanent Magnet DC Motors at 12 volts through 240 volts. 500 through 5000 RPM. Permanent Magnet DC Motors designs available for either battery or generator, or rectified A.C. power (steady-state). Standard motor designs available in 1.0 and 1.25 service factor. 1/8 through 2 HP (depending on current limitations and speed). 56 Frame (6 5/8 inch outside diameter